GS-4210-Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of GS-4210 Series
4.15 Power over Ethernet
The GS-4210 PoE Switch Series can easily build a power central-controlled IP phone system, IP camera system and AP group
for the enterprise. For instance, cameras / APs can be easily installed around the corner in the company for surveillance
demands or build a wireless roaming environment in the office. Without the power-socket limitation, the GS-4210 PoE Switch
Series makes the installation of cameras or WLAN APs easier and more efficient.
PoE Power Budget list for GS-4210 PoE switch series
Model Name PoE Budget @ 25 degrees C PoE Budget @ 50 degrees C
GS-4210-8P2T2S 120 watts 100 watts
GS-4210-8P2T2S 240 watts 200 watts
GS-4210-16P4C 220 watts 190 watts
GS-4210-24P4C 220 watts 190 watts
GS-4210-24PL4C 440 watts 380 watts
Figure 4-16-1: Power over Ethernet Status
337