GS-4210-Series User Manual

User’s Manual of GS-4210 Series
PoE Power Output --- Per port 52V DC, 36 watts (max.)
Power Pin Assignment --- 1/2(+), 3/6(-)
PoE Power Budget ---
440 watts (max.) @ 25 degrees C
380 watts (max.) @ 50 degrees C
PoE Ability PD @ 9 watts --- 48 units
PoE Ability PD @ 15 watts --- 29 units
PoE Ability PD @ 30 watts --- 14 units
Layer 2 Functions
Port Mirroring
TX/RX/Both
Many-to-1 monitor
VLAN
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 8 groups, 8 ports per trunk group
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU guard, BPDU filtering and BPDU forwarding
IGMP Snooping
IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
MLD Snooping
IPv6 MLD (v1/v2) snooping, up to 256 multicast groups
Access Control List
IPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE
QoS
8 mapping ID to 8 level priority queues
- Port number
- 802.1p priority
- DSCP / IP Precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
Security
IEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
28