Datasheet

GS-4210-24P4C/GS-4210-24PL4C
4
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-4210-24P(L)4C enables the administrator to monitor the status of the power usage of the
connectedPDsinrealtime.Thus,itgreatlyenhancesthemanagementefciencyofthefacilities.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the GS-4210-24P(L)4C operates on a per-port basis at 10Mbps duplex operation but can support 36-watt PoE power output
over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GS-4210-24P(L)4C provides an
additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation.
Extend Mode
Power
250 meters (820 feet)
PoE
GS-4210-24P(L)4C
PoE
10BASE-T UTP with PoE
PoE IP Camera
Environmentally-friendly, Smart Fan Design for Silent Operation
The GS-4210-24P(L)4C features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the
speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-24P(L)4C is able to
operate reliably, stably and quietly in any environment without affecting its performance.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the GS-4210-24P(L)4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities
need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
GS-4210-24P(L)4C
IPv4 Network
IPv6 Network
Application
IPv6
Stack
IPv4
Stack
Transport Layer
TELNET WEB
SSHSNMP
ICMPTLS
DHCPNTP
IPv6 Management HostIPv4 Management Host
Robust Layer 2 Features
The GS-4210-24P(L)4C can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q
VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-
24P(L)4C allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol
(LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.