Quick Guide
7
3.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed
Switch and the terminal will run self testing procedures. Then, the
following message asks to log in user name and password. The factory
default user name and password are shown as follows and the login
screeninFigure3-3appears.
Username:admin
Password:admin
Note
The following console screen based on the GS-4210-
24T4SisthesameasthoseoftheGS-4210series.
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch.
For a detailed description of the commands, please refer to the
followingchapters.
Note
1.For security reason, please change and memorize the
newpasswordafterthisfirstsetup.
2.Only accept commandin lowercase letterunder console
interface.