Quick Guide

6
3. Terminal Setup
To congure thesystem,connect a serialcableto a COM port on a PC
or notebook computer while the other end to RJ45 console port of the
ManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminal programis required to makethe software connection to the
ManagedSwitch.
Run terminal program on the OS.
When the following screen appears, make sure that the COM port
shouldbeconguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 3-2: COM Port Conguration