GS-4210-Series Quick Guide

6
4. Terminal Setup
The GS4210-8P2T2S, GS-4210-24P4C and GS-4210-24PL4C are equipped with a
console interface for local switch setup and maintenance. To congure the system,
connect a serial cable to a COM port on a PC or notebook computer and to the
RJ45typeoftheconsoleportoftheManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS-232 to RJ45 Cable
Console Port
RJ-45
Figure 4-1 Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud :115200
zDatabits :8
zParity :None
zStopbits :1
zFlowcontrol :None
Figure 4-2 COM Port Conguration
Note
Console interface is not availablefor the GS-4210-8P2S, GS-4210-
48T4SandGS-4210-48P4S.