GS-4210-24P2S User Manual

User’s Manual of GS-4210-16T2S_24T2S_24P2S
The page includes the following fields:
Object Description
 Enable SNTP
Enabled: Enable SNT
P mode operation.
When enable SNTP mode operation, the agent forward and to transfer
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
 Manual Time
To set time manually.
 Year - Select the starting Year.
 Month - Select the starting month.
 Day - Select the starting day.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Seconds - Select the starting seconds.
Allo
w select the time zone according to current location of switch.
 Time Zone
 Daylight Saving Time
This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
Daylight Saving Time duration to repeat the configuration every year. Select
'Non-Recurring' and configure the Daylight Saving Time duration for single time
configuration. (Default: Disabled).
 Daylight Saving Time
Offset
Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to
1440 Minutes )
 Recurring From  Day - Select the starting day.
 Week - Select the starting week number.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Recurring To  Day - Select the starting day.
 Week - Select the starting week number.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Non-recurring From  Year - Select the starting Year.
 Month - Select the starting month.
 Date - Select the starting date.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
57