Datasheet

5
GS-4210-24P4C
GS-4210-24PL4C
High Scalability & Best Security for Today’s IP Networking and Cyber Security Solution
The GS-4210-24P(L)4C comes with non-blocking design and SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost.
Providing twenty-four 10/100/1000BASE-T PoE ports and four gigabit TP/SFP combo ports, the GS-4210-24P(L)4C can easily build a networking security
on the cyber security system for the enterprises. For instance, it can work with the router and UTM to perform comprehensive security for today’s
businesses.
1000
1000Base-SX/LX Fiber-optic
1000
1000Base-T UTP
PoE
1000Base-T UTP with PoE
PoE PoE PoE PoE PoE PoE PoE PoE
24 PoE IP Phones 14 PoE IP Cameras
Network Devices Network Devices
PoE PoE PoE PoE PoE PoE PoE PoE
1KM
GS-4210-24PL4CGS-4210-24P4C
NVR Router UTM PC
IP PBX
ServerLaptop
Specications
Product
GS-4210-24P4C GS-4210-24PL4C
Hardware Specications
Copper Ports 28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port
SFP/mini-GBIC Slots
4 x 100/1000BASE-X SFP interface shared with port-25 to port-28
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 24 ports with 802.3at / af PoE injector function with port-1 to port-24
Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 56Gbps / non-blocking
Switch Throughput@64Bytes 41.67Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Switch Architecture PWR, SYS, LNK/ACT, PoE-in-Use, 1000, FAN 1 Alert, FAN 2 Alert, PoE PWR Alert
Power Requirements 100~240V AC, 50/60Hz, auto-sensing
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
ESD Protection 2KV DC
Enclosure Metal
Weight GS-4210-24P4C: 4214g GS-4210-24PL4C: 4814g
Power Consumption / Dissipation GS-4210-24P4C: 275 watts (max.) / 938.3 BTU GS-4210-24PL4C: 544 watts (max.) / 1856.2 BTU
Fan 2 x smart fan 3 x smart fan
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE+ PSE
PoE Power Supply Type End-span
PoE Power Output Per port 56V DC, 30.8 watts (max.)
Power Pin Assignment 1/2(+), 3/6(-)