User's Manual

Table Of Contents
User’s Manual of GS-4210-16T2S_24T2S_24P2S
4.8.5 Rate Limit
Configure the switch port rate limit for the switch port on this page.
4.8.5.1 Ingress Bandwidth Control
This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting and Status screens in
Figure 4-8-29, Figure 4-8-30 and Figure 4-8-31 appear.
Figure 4-8-29: Ingress Bandwidth Control Settings Page Screenshot
The page includes the following fields:
Object Description
Allo
w assigning burst size and the options are 1 to 65535. Unit: Bytes.
Burst Size
Select port n
umber for this drop down list.
Port
Enab
le or disable the port rate policer. The default value is "Disabled".
State
Confi
gure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000, must a multiple of 16.
Rate (Kbp
s)
Button
: Click to apply changes.
Figure 4-8-30: Ingress Port Burst Size Configuration Page Screenshot
214