User's Manual

User’s Manual of GS-4210-16T2S_24T2S_24P2S
The page includes the following fields:
Object Description
Enab
le or disable the STP function. The default value is "Disabled".
 Enable
Set the BPDU for
ward method.
 BPDU Forward
T
he path cost method is used to determine the best path between devices.
Therefore, lower values should be assigned to ports attached to faster media,
and higher values assigned to ports with slower media.
 PathCost Method
T
he STP protocol version setting. Valid values are STP-Comp
atible,
RSTP-Operation and MSTP-Operation.
 Forc
e Version
 Configuration Name
Identifier used to identify the configuration currently being used.
 Configuration Revision
Identifier used to identify the configuration currently being used. The values
allowed are between 0 and 65535.
The default value is 0.
Button
: Click to apply changes.
Figure 4-6-5: STP Information Page Screenshot
The page includes the following fields:
Object Description
Displ
ay the current STP state.
 STP
Displ
ay the current BPDU forward mode.
 BPDU Forward
Displ
ay the current cost method.
 Cost Method
Displ
ay the current force version.
 Force Version
 Configuration Name
Display the current configuration name.
 Configuration Revision
Display the current configuration revision.
143