User's Manual

User’s Manual of GS-4210-16T2S_24T2S_24P2S
The page includes the following fields:
Object Description
Select port for this dro
p down list to assign protocol VLAN port
 Port Select
Contro
ls whether GVRP is enabled or disabled on port
 GVRP Enabled
B
y default GVRP ports are in Normal registration mode. These ports use GVRP
join messages from neighboring switches to prune the VLANs running across the
802.1Q trunk link. If the device on the other side is not capable of sending GVRP
messages, or if you do not want to allow the switch to prune any of the VLANs,
use the Fixed mode. Fixed mode ports will forward for all VLANs that exist in the
switch database. Ports in Forbidden mode forward only for VLAN 1.
 Registration Mode
GVRP
can dynamically create VLANs on switches for trunking purposes. By
enabling GVRP dynamic VLAN creation, a switch will add VLANs to its database
when it receives GVRP join messages about VLANs it does not have.
 VLAN Creation
Buttons
: Click to apply changes.
Figure 4-5-16: GVRP Port Status Page Screenshot
The page includes the following fields:
Object Description
T
he switch port number of the logical port.
 Port
Displ
ay the current GVRP port state.
 Enable State
Displ
ay the current registration mode.
 Registration Mode
 VLAN Creation State
Display the current VLAN creation state.
127