User's Manual

User’s Manual of GS-4210-16T2S_24T2S_24P2S
Edit Interface Setting
The Edit Interface Setting/Status screens in Figure 4-5-5 & Figure 4-5-6 appear.
Figure 4-5-5: Edit Interface Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select
Select port number for this drop down list to set VLAN port setting.
 Interface VLAN Mode
Set the port in hybrid, access, trunk, tunnel mode.
 Hybrid means the port allows the traffic of multi-VLANs to pass with tag
or untag mode.
 Access indicates the port belongs to one VLAN only.
 Trunk means the port allows traffic of multiple VLAN.
 Tunnel configures IEEE 802.1Q tunneling for a downlink port to another
device within the customer network.
 PVID
Allow assign PVID for selected port.
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must as same as the VLAN ID that the port belong to VLAN group, or the
untagged traffic will be dropped.
The range for the PVID is 1-4094.
 Accepted Type
Determines whether the port accepts all frames or only tagged frames. This
parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded.
Options:
 All
 Tag Only
 Untag Only
By default, the field is set to All.
 Ingress Filtering  If ingress filtering is enabled (checkbox is checked), frames classified to a
VLAN that the port is not a member of get discarded.
 If ingress filtering is disabled, frames classified to a VLAN that the port is not a
member of are accepted and forwarded to the switch engine.
However, the port will never transmit frames classified to VLANs that it is not a
member of.
117