User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 Power over Ethernet (GS-4210-16P2S and GS-4210-24P2S only)
- 4.15 RMON
- 4.16 Maintenance
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 6.1 User Mode Commands
- 6.2 Privileged Mode Commands
- 6.2.1 clear command
- 6.2.2 clock command
- 6.2.3 configure command
- 6.2.4 copy command
- 6.2.5 debug command
- 6.2.6 delete command
- 6.2.7 disable command
- 6.2.8 end command
- 6.2.9 exit command
- 6.2.10 no command
- 6.2.11 ping command
- 6.2.12 reboot command
- 6.2.13 renew command
- 6.2.14 restore-defaults command
- 6.2.15 save command
- 6.2.16 show command
- 6.2.17 ssl command
- 6.2.18 traceroute command
- 6.2.19 udld command
- 6.3 Global Config Mode Commands
- 6.3.1 aaa Command
- 6.3.2 boot Command
- 6.3.3 bridge Command
- 6.3.4 class-map Command
- 6.3.5 clock Command
- 6.3.6 dos Command
- 6.3.7 dot1x Command
- 6.3.8 do Command
- 6.3.9 enable Command
- 6.3.10 end Command
- 6.3.11 errdisable Command
- 6.3.12 exit Command
- 6.3.13 gvrp Command
- 6.3.14 hostname Command
- 6.3.15 interface Command
- 6.3.16 ip Command
- 6.3.17 ipv6 Command
- 6.3.18 jumbo-frame Command
- 6.3.19 l2 Command
- 6.3.20 lacp Command
- 6.3.21 lag Command
- 6.3.22 line Command
- 6.3.23 lldp Command
- 6.3.24 logging Command
- 6.3.25 mac Command
- 6.3.26 management-vlan Command
- 6.3.27 mirror Command
- 6.3.28 no Command
- 6.3.29 policy-map Command
- 6.3.30 port-security Command
- 6.3.31 qos Command
- 6.3.32 radius Command
- 6.3.33 rate-limit Command
- 6.3.34 rmon Command
- 6.3.35 Snmp Command
- 6.3.36 sntp Command
- 6.3.37 spanning-tree Command
- 6.3.38 storm-control Command
- 6.3.39 system Command
- 6.3.40 tacacs Command
- 6.3.41 udld Command
- 6.3.42 username Command
- 6.3.43 vlan Command
- 6.3.44 voice-vlan Command
- 7. SWITCH OPERATION
- 8. POWER OVER ETHERNET OVERVIEW
- 9. TROUBLESHOOTING
- APPENDIX A
User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
14
1.2 Product Description
Cost-optimized Managed Switch for Small and Medium Businesses
PLANET Managed Switch is an ideal Gigabit Switch which provides cost-effective advantage to local area network and is widely
accepted in the SMB office network. It offers intelligent Layer 2 data packet switching and management functions, friendly
web user interface and stable operation. Besides the hot IPv6/IPv4 management and abundant L2/L4 switching functions,
the GS-4210 Series comes with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable
office network environment. The GS-4210-16P2S and GS-4210-24P2S comply with IEEE 802.3at Power over Ethernet Plus
(PoE+) at an affordable price. Its 24 Gigabit Ethernet ports are integrated with 802.3at PoE+ injector function on all ports.
The Managed Switch is equipped with 16/24/48 10/100/1000BASE-T Gigabit Ethernet ports and 2/4 additional
100/1000BASE-X SFP interfaces with inner power system. It offers a rack-mountable, affordable, safe and reliable Gigabit
network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management.
IEEE 802.3at/af Compliant Power Source Switch (GS-4210-16P2S and GS-4210-24P2S)
The PoE in-line power following the IEEE 802.3at/af standard makes the GS-4210-16P2S and GS-4210-24P2S able to deliver
Gigabit speed data and up to 30 watts of power per port to 16/24 PoE compliant powered devices (PDs) with a combined power
output budget of up to 240/300 watts. The GS-4210-16P2S and GS-4210-24P2S provides more flexibility in power requirement
for all kinds of PDs with affordable installation costs.
High-performance Switch Architecture
The Managed Switch provides 16/24/48 10/100/1000Mbps Gigabit Ethernet ports and 2/4 100/1000BASE-X SFP slots. It
boasts a high-performance switch architecture capable of providing the non-blocking switch fabric and wire-speed throughput as
high as 36/52Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
Robust Layer 2 Features
The Managed Switch can be programmed for advanced switch management functions such as dynamic port link aggregation,
802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD
Snooping. Via the link aggregation, the Managed Switch allows the operation of a high-speed trunk to combine with multiple
ports such as a 32Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2
protocol included to help discover basic information about neighboring devices on the local broadcast domain.