Datasheet

GS-4210-24P2S
1
24-Port 10/100/1000T 802.3at PoE + 2-Port
100/1000X SFP Managed Switch
Cost-optimized Managed PoE+ Switch with Advanced L2/L4 Switching and
Security
PLANET GS-4210-24P2S is an ideal Gigabit PoE Switch which provides cost-effective
advantage to local area network and is widely accepted in the SMB office network. It
offers intelligent Layer 2 data packet switching and management functions, friendly web
user interface and stable operation. The model complies with IEEE 802.3at Power over
Ethernet Plus (PoE+) at an affordable price. The GS-4210-24P2S is equipped with 24
10/100/1000BASE-T Gigabit Ethernet ports and 2 100/1000BASE-X SFP interfaces with
inner power system. Its 24 Gigabit Ethernet ports integrated with 802.3at PoE+ injector
function on all ports. It offers a rack-mountable, affordable, safe and reliable power
solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data
security and network trafc management.
Built-in Unique PoE Functions for Powered Devices Management
As the PoE managed switch for surveillance, wireless and VoIP networks, the GS-4210-
24P2S features special PoE management functions:
■ PD alive check
■ Scheduled power recycling
■ PoE schedule
■ PoE usage monitoring
Physical Port
• 24-port 10/100/1000BASE-T Gigabit RJ45 copper
• 2 100/1000BASE-X mini-GBIC/SFP slots
• RJ45 console interface for switch basic management and setup
• Reset button for system factory default and reboot
Switching
• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps
full duplex mode, ow control and auto-negotiation, and auto
MDI/MDI-X
• Features Store-and-Forward mode with wire-speed ltering and
forwarding rates
• IEEE 802.3x ow control for full duplex operation and back
pressure for half duplex operation
• 9K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Power over Ethernet
• Complies with IEEE 802.3at High Power over Ethernet
• Complies with IEEE 802.3af Power over Ethernet
• Up to 24 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• 300-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE Management
–
Total PoE power budget control
–
Per port PoE function enable/disable
–
PoE Port Power feeding priority
–
Per PoE port power limitation
–
PoE delay
–
PD classication detection
• Intelligent PoE features
–
PoE usage threshold control
–
PD alive check
–
PoE schedule
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and IEEE
802.3x pause frame ow control (full-duplex)
• High performance Store and Forward architecture, runt/CRC
ltering eliminates erroneous packets to optimize the network
bandwidth
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–
Protocol VLAN
24 x Gigabit 802.3at PoE PortsPoE & Speed, LNK/ACT Status
Power LED RJ45 Console Port
Reset Button 2 x 100/1000X SFP Slots
100/1000X SFP LNK/ACT Status