Quick Guide

9
3.3 StoringCurrentSwitchConguration
In the Managed switch, the running conguration le is stored in the RAM. In the
currentversion, therunning congurationsequence of running-congcan be saved
fromthe RAMto FLASHby writingthe commandor copying the running-cong
startup-cong command, so that the running conguration sequence becomes
thestartupcongurationle,whichisthecongurationsaved.
1.At the “GS-4210 Series#” prompt, enter “copy running-cong startup-
cong” as shown in Figure 3-5.
Figure 3-5: Storing Current Conguration Command Screen
Note
If you are not familiar with console command or the related para-
meter,enter“?”anytimeinconsoletogetthehelpdescription.