Datasheet

2
GS-4210-24HP2C
eliminates erroneous packets to optimize the network
bandwidth
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider Bridging (VLAN Q-in-Q) support (IEEE
802.1ad)
– Protocol VLAN
– Voice VLAN
– Private VLAN
– Management VLAN
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STPBPDUGuard,BPDUlteringandBPDUforwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
Quality of Service
• Ingress and egress rate limit per port bandwidth control
• Storm control support
– Broadcast/Unknown unicast/Unknown multicast
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IPprecedenceofIPv4/IPv6packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
Security
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ login user access authentication
Door
Phone
Thin
Client
IP Camera
POS
System
Digital
Signage
Health
Care
IP Phone
11ac
Wi-Fi AP
PTZ
Camera
802.3at
30W
60-95W
802.3bt
802.3af
15W
Lighting
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
Built-in Unique PoE Functions for Powered Devices Management
Being the managed PoE switches for surveillance, wireless and VoIP networks, the
GS-4210-24HP2C features the following special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
■PoEExtension
Intelligent Powered Device Alive Check
The GS-4210-24HP2C can be configured to monitor connected PD (Powered
Device)statusinrealtimeviapingaction.OncethePDstopsworkingand
responding, the GS-4210-24HP2C will resume the PoE port power and bring the
PD back to work. It will greatly enhance the network reliability through the PoE port
resetting the PD’s power source and reducing administrator management burden.
Scheduled Power Recycling
The GS-4210-24HP2C allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specified time each week. Therefore, it will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.