Quick Guide
Table Of Contents
5
3. Terminal Setup
TheManagedSwitchisequipped withaconsoleinterface for localswitchsetup and
maintenance. To congure the system, connect a serial cable to a COM port on a
PCornotebook computerand to theRJ45 type ofthe console portof theManaged
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:115200
z Databits:8
z Parity:None
z Stopbits:1
z Flowcontrol:None