(V2) Datasheet
GS-4210-16UP4C
7
Specications
Product
GS-4210-16UP4C
HardwareSpecications
Copper Ports 20 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
SFP/mini-GBIC Slots
4 x 100/1000BASE-X SFP interface shared with port-17 to port-20
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 16 ports with 802.3at/af/802.3bt PoE++ injector function with port-1 to port-16
Switch Architecture Store-and-Forward
Switch Fabric 40Gbps/non-blocking
Switch Throughput@64Bytes 29.7Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
System:
PWR x1 (Green)
SYS x1 (Green)
PerPoEPort(Port1toPort16):
10/100/1000 LNK/ACT x1 (10/100:Orange.1000:Green)
IEEE 802.3af/at/bt PoE-in-use x1 (802.3af/at: Orange. 802.3bt: Green)
PerGigabitTPPort(Port17toPort20):
10/100 LNK/ACT x1 (Orange)
1000 LNK/ACT x1 (Green)
PerGigabitSFPPort(Port17toPort20):
100 LNK/ACT x1 (Orange)
1000 LNK/ACT x1 (Green)
Alert:
PoE PWR x1 (Red)
FAN1 x1 (Red)
FAN2 x1 (Red)
FAN3 x1 (Red)
Power Requirements 100~240V AC, 50/60Hz, auto-sensing
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure Metal
Weight 4.4kg
Power Consumption/Dissipation 500 watts (max.)/1706 BTU
Fan 3 x smart fan
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++ PSE
Backward compatible with IEEE 802.3at/af PoE PSE
PoE Power Supply Type
■802.3bt
■UPoE/POH
■End-span
■Mid-span
■Force
PoE Power Output
Per port 54V DC
■802.3btmode,Ports1to8:maximum90watts
■802.3btmode,Ports9to16:maximum60watts
■UPoEmode,Ports1to8:maximum95watts
■UPoE-mode,Ports9to16:maximum72watts
■End-spanmode:maximum36watts
■Mid-spanmode:maximum36watts
Power Pin Assignment
■802.3bt:1/2(-),3/6(+),4/5(+),7/8(-)
■UPoE:1/2(-),3/6(+),4/5(+),7/8(-)
■End-span:1/2(-),3/6(+)
■Mid-span:4/5(+),7/8(-)
PoE Power Budget 400 watts (max.)
Number of 90W 802.3bt Type-4 PDs 4