(V2) Datasheet

3
GS-4210-16UP4C
• Access control list
– IPv4/IPv6 IP-based ACL
– MAC-based ACL
• MAC security
– Static MAC
– MACltering
• PortsecurityforsourceMACaddressentriesltering
• DHCPsnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPsourceguardpreventsIPspoongattacks
• DoS attack prevention
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch management interface
– Web switch management
– Console and telnet command line interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms and events)
– SNMPtrapforinterfacelinkupandlinkdownnotication
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthroughwebinterface
– Dual images
– Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Network Diagnostic
– SFP-DDM (digital diagnostic monitor)
– Cable diagnostics
– ICMPv4/ICMPv6 remote ping
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Event message logging to remote syslog server
• Smart fan with speed control
• PLANET NMS (Network Management System) and Smart
Discovery Utility for deployment management
Intelligent Powered Device Alive Check
The GS-4210-16UP4C can be configured to monitor connected PD status in real
time via ping action. Once the PD stops working and responding, the GS-4210-
16UP4C will resume the PoE port power and bring the PD back to work. It will
greatly enhance the network reliability through the PoE port resetting the PD’s
power source and reducing administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
Scheduled Power Recycling
The GS-4210-16UP4C allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specified time each week. Therefore, it will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
PoE Schedule for Energy Savings
Under the trend of energy saving worldwide and contributing to environmental
protection, the GS-4210-16UP4C can effectively control the power supply besides
its capability of giving high watts power. The “PoEschedule”function helps you
to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs or Enterprises save power and
money. It also increases security by powering off PDs that should not be in use
during non-business hours.
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month