(V2) Datasheet

2
GS-4210-16UP4C
• High performance Store and Forward architecture, broadcast
stormcontrol,andrunt/CRClteringthateliminates
erroneous packets to optimize the network bandwidth
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Protocol VLAN
– Voice VLAN
– Private VLAN
– Management VLAN
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STPBPDUGuard,BPDUlteringandBPDUforwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– 2 groups of 4-port trunk
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
Quality of Service
• Ingress and egress rate limit per port bandwidth control
• Storm control support
– Broadcast/Unknown unicast/Unknown multicast
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
Security
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ login user access authentication
802.3bt PoE++ 60~95-watt Power over 4-pair UTP Solution
As the GS-4210-16UP4C adopts the IEEE 802.bt PoE++ standard and PoH
technology, it is capable to source up to 95 watts of power by using all the four
pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to
each remote PoE compliant powered device (PD). Its power capability is three times
more than that of the conventional 802.3at PoE+ and it is an ideal solution for those
high power consuming network PDs, such as:
■PoEPTZspeeddomecameras
■Networkdevices
■Thinclients
■AIO(all-in-one)touchPCs,pointofsale(POS)andinformationkiosks
■Remotedigitalsignagedisplays
■PoElightings
Door
Phone
Thin
Client
IP Camera
POS
System
Digital
Signage
Health
Care
IP Phone
11ac
Wi-Fi AP
PTZ
Camera
802.3at
30W
60-95W
802.3bt
802.3af
15W
Lighting
802.3bt PoE++ and Advanced PoE Power Output Mode Management
To meet the demand of various powered devices consuming stable PoE power, the
GS-4210-16UP4C supports rich PoE operation modes including 90-watt 802.3bt
type-4 PoE++ mode, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force
modetosolvetheincompatibilityofnon-standard4-pairPoEPDsintheeld.
■95WUPoE/PoHPowerOutputMode
■90W802.3btPoE++PowerOutputMode
■72WUPoE/PoHPowerOutputMode
■60W802.3btPoE++PowerOutputMode
■60WForcePowerOutputMode
■36WEnd-spanPoEPowerOutputMode
■36WMid-spanPoEPowerOutputMode
Built-in Unique PoE Functions for Powered Devices Management
As it is the managed PoE switch for surveillance, wireless and VoIP networks, the
GS-4210-16UP4C features the following special PoE management functions:
■PDAliveCheck
■ScheduledPowerRecycling
■PoESchedule
■PoEUsageMonitoring
■PoEExtension