User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of GS-4210 UPoE Series
The page includes the following fields:
Object Description
OE-Present
Display the current SFP OE-present
LOS
Display the current SFP LOS
4.3.10.1 SFP Module Detail Status
The SFP Module Detail Status screen in Figure 4-3-22 appears.
Figure 4-3-22 SFP Module Detail Status Page Screenshot with Sample Switch
The page includes the following fields:
Object Description
Port
The logical port for the settings contained in the same row
Temperature
Display the current SFP temperature
Voltage
Display the current SFP voltage
Current
Display the current SFP current
Output Power
Display the current SFP output power
Input Power
Display the current SFP input power
Transmit Fault
Display the current SFP transmits fault
Loss of Signal
Display the current SFP loss of signal.
Rate Ready
Display the current SFP rate ready.
97