User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of GS-4210 UPoE Series
Figure 4-3-4 Interface Counters Page Screenshot
Object Description
Received Octets
The total number of octets received on the interface, including framing
characters.
Received Unicast
Packets
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Received Unknown
Unicast Packets
The number of packets received via the interface which is discarded because of
an unknown or unsupported protocol.
Received Discards
Packets
The number of inbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a packet could be to free up
buffer space.
Transmit Octets
The total number of octets transmitted out of the interface, including framing
characters.
Transmit Unicast
Packets
The total number of packets that higher-level protocols requested is transmitted
to a subnetwork-unicast address, including those that were discarded or not sent.
Transmit Unknown
Unicast Packets
The total number of packets that higher-level protocols requested is transmitted
to a subnetwork-unicast address, including those that were discarded or not sent.
Transmit Discards
Packets
The number of inbound packets which is chosen to be discarded even though no
errors have been detected to prevent from being delivered to a higher-layer
protocol. One possible reason for discarding such a packet could be to free up
buffer space.
Received Multicast
Packets
The number of packets, delivered by this sub-layer to a higher (sub-) layer, is
addressed to a multicast address at this sub-layer.
81