User's Manual

Table Of Contents
User’s Manual of GS-4210 UPoE Series
1.5 Product Specifications
GS-4210-16UP4C
Product GS-4210-16UP4C
Hardware Specifications
Copper Ports 20 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
SFP/mini-GBIC Slots
4 x 100/1000BASE-X SFP interface shared with port-17 to port-20
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 16 ports with 802.3at/af/Ultra PoE injector function with port-1 to port-16
Switch Architecture Store-and-Forward
Switch Fabric 40Gbps/non-blocking
Switch Throughput@64Bytes 29.7Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
PWR, SYS, LNK/ACT, PoE-in-use, 1000, FAN1, FAN2, PoE PWR
Power Requirements 100~240V AC, 50/60Hz, auto-sensing
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure Metal
Weight 4479g
Power
Consumption/Dissipation
500 watts (max.)/1706 BTU
Fan 3 x smart fan
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at/Ultra PoE PSE
PoE Power Supply Type End-span/Mid-span/UPoE
PoE Power Output Per port 54V DC, 60 watts (max.)
Power Pin Assignment
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-)
PoE Power Budget 400 watts (max.)
PoE Ability PD @ 15 watts 24 units
19