GS-4210UP4C Quick Guide

6
4. Terminal Setup
TheManagedSwitchisequipped withaconsoleinterface forlocalswitchsetup and
maintenance. To congure the system, connect a serial cable to a COM port on a
PCornotebook computerand to theRJ45 type ofthe console portof theManaged
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:115200
z Databits:8
z Parity:None
z Stopbits:1
z Flowcontrol:None
Figure 4-2 COM Port Conguration