GS-4210-Series (V2) User Manual

Command Guide of GS-4210 Series
67
Switch> show privilege
Current CLI Username:
Current CLI Privilege: 3
4.4.2 exit
Command:
exit
Mode:
User EXEC
Privileged EXEC
Global Configuration
Interface Configuration
Line Configuration
.......
Usage Guide:
In User EXEC mode, “exit” command will close current CLI session. In other modes, “exit” command will go to the
parent mode. And every mode has the “exit” command.
Example:
This example shows how to enter privileged EXEC mode and use exit command to go back to user EXEC mode.
Switch> enable
Switch# exit
Switch>
4.4.3 configure
Command:
configure
Mode: