GS-4210-Series (V2) User Manual

Command Guide of GS-4210 Series
64
specify unique name string to show ACL with the name.
Example:
The example shows how to show all IP ACL.
Switch(config)# show ip acl
IP access list iptest
sequence 1 deny ip 192.168.1.80/255.255.255.255 any
4.3.11 show acl utilization
Command:
show all utilization
Mode:
Global Configuration
Usage Guide:
Use the show acl utilization command to show the usage of PIE of ASIC. When a ACL bind to interface, it needs
ASIC PIE resource to help to filter packet. An ASIC has limited PIE resource. This command help user to know the
PIE usage of AISC.
Example:
The example shows how to show PIE utilization
Switch(config)# show acl utilization
Group Index : 1
Group Assign to : Mac-based ACL and IPv4-based ACL
Group Maximun ACEs : 128
Group Remain ACEs : 125
Group Used ACEs : 3
ACEs Used by ACL : 3
ACEs Used by QoS : 0
------------------------------
Group Index : 2
Group Assign to : None
Group Maximun ACEs : 128
Group Remain ACEs : 128