GS-4210-Series (V2) User Manual

Command Guide of GS-4210 Series
48
5 | 20 | radiuskey
This example shows how to create a new radius server with above default config and show results.
Switch(config)# radius host 192.168.1.111
Switch# show radius
Prio | IP Address | Auth-Port| Retries| Timeout| Usage-Type| Key
------+-----------------+----------+--------+--------+-----------+---------
1 | 192.168.1.111 | 1812 | 5 | 20 | All | radiuskey
4.2.12 radius host
Command:
radius host HOSTNAME [auth-port <0-65535>] [key RADIUSKEY] [priority
<0-65535>] [retransmit <1-10>] [timeout <1-30>] [type (login|802.1x|all)]
no radius [host HOSTNAME]
Parameter:
host HOSTNAME
Specify radius server host name, both IP address and domain name are available.
auth-port
<0-65535>
Specify radius server udp port
key RADIUSKEY
Specify radius server key string
priority <0-65535>
Specify radius server priority
retransmit <1-10>
Specify radius server retransmit times
timeout <1-30>
Specify radius server timeout value
type
login
802.1X
all
Usage type of this server
Use for login
Use for 802.1x authentication
Use for both login and 802.1x authentication
Default:
Default radius key is “”.
Default radius timeout is 3 seconds.
Mode: