GS-4210-Series (V2) User Manual

Command Guide of GS-4210 Series
329
Acronym is DFL
Offset is UTC+8
Summertime:
Acronym is DLS
Recurring every year.
Begins at 2 0 3 2:0
Ends at 1 0 11 2:0
Offset is 60 minutes.
4.28.6 sntp
Command:
sntp host HOSTNAME [port <1-65535>]
no sntp
Parameter:
HOSTNAME
Specify ip address or hostname of sntp server
port <1-65535>
Specify server port of sntp server
Mode:
Global Configuration
Usage Guide:
Use the sntp command to set remote SNTP server. Default server port is 123. Use the no form of this command to
default setting.
Example:
The example shows how to set remote SNTP server of switch. You can verify settings by the following show show
sntp command.
switch(config)# clock source sntp
switch(config)# sntp host 192.168.1.100
switch(config)# show sntp
SNTP is Enabled
SNTP Server address: 192.168.1.100
SNTP Server port: 123