Datasheet

4
GS-4210-16UP4C
GS-4210-24UP4C
• DynamicARPInspectiondiscardsARPpacketswithinvalid
MAC address to IP address binding
• IPsourceguardpreventsIPspoongattacks
• DoSattackprevention
• IP address access management to prevent unauthorized
intruder
Management
• IPv4andIPv6dualstackmanagement
• Switch management interface
– Web switch management
– Console and telnet command line interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management
– FourRMONgroups(history,statistics,alarmsandevents)
– SNMPtrapforinterfacelinkupandlinkdownnotication
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTPandDHCPforIPaddressassignment
• System maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthroughwebinterface
– Dual images
– Hardware reset button for system reboot or reset to factory
default
• SNTPNetworkTimeProtocol
• NetworkDiagnostic
– SFP-DDM (digital diagnostic monitor)
– Cable diagnostics
– ICMPv4/ICMPv6 remote ping
• LinkLayerDiscoveryProtocol(LLDP)andLLDP-MED
• Event message logging to remote syslog server
• Smart fan with speed control
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment
management
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-4210-
16UP4C and GS-4210-24UP4C enable the administrator to monitor the status of
the power usage of the connected PDs in real time. Thus, it greatly enhances the
managementefciencyofthefacilities.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the GS-4210-16UP4C and GS-4210-24UP4C
operate on a per-port basis at 10Mbps duplex operation but can support 36-watt
PoE power output over a distance of up to 250 meters overcoming the 100m
limit on Ethernet UTP cable. With this brand-new feature, the GS-4210-16UP4C
and GS-4210-24UP4C provide an additional solution for 802.3at/af PoE distance
extension, thus saving the cost of Ethernet cable installation.
Extend Mode
Power
250 meters (820 feet)
PoE
GS-4210-16UP4C
PoE
10BASE-T UTP with PoE
PoE IP Camera
Power
250 meters (820 feet)
PoE
GS-4210-24UP4C
PoE IP Camera
Environment-friendly, Smart Fan Design for Silent Operation
TheGS-4210-16UP4CandGS-4210-24UP4Cfeatureadesktop-sizedmetal
housing, a low noise design and an effective ventilation system. They support the
smart fan technology that automatically controls the speed of the built-in fan to
reduce noise and maintain the temperature of the PoE switch for optimal power
output capability. The GS-4210-16UP4C and GS-4210-24UP4C are able to operate
reliably, stably and quietly in any environment without affecting its performance.
PoE Schedule for Energy Savings
Under the trend of energy savings worldwide and contributing to environmental
protection, the GS-4210-16UP4C and GS-4210-24UP4C can effectively control
the power supply besides its capability of giving high watts power. The “PoE
schedule” function helps you to enable or disable PoE power feeding for each PoE
port during specified time intervals and it is a powerful function to help SMBs or
Enterprises save power and money. It also increases security by powering off PDs
that should not be in use during non-business hours.