(V2) Datasheet

GS-4210-16P4C
7
Specications
Product
GS-4210-16P4C
HardwareSpecications
Copper Ports 20 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 x 100/1000BASE-X SFP interfaces with Port-17 to Port-20.
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
Console 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 19-inch, 1U height
Weight 4.1kg
ESD Protection
Contact Discharge 4KV DC
Air Discharge 8KV DC
Enclosure Metal
Power Requirements AC 100~240V, 50/60Hz, auto-sensing
Power Consumption / Dissipation 288 watts (max.)/982 BTU
Fan 3 smart fans
LED
System:
PWR x1(Green)
SYS x1 (Green)
Per PoE Port (Port 1 to Port 16):
LNK/ACT x1 (Green)
PoE-in-use x1 (Orange)
Per Gigabit RJ45 Port (Port 17 to Port 20):
1000 LNK/ACT x1 (Green)
10/100 LNK/ACT x1 (Orange)
Per Gigabit SFP Port (Port 17 to Port 20):
1000 LNK/ACT x1 (Green)
100 LNK/ACT x1 (Orange)
Switching
Switch Architecture Store-and-Forward
Switch Fabric 40Gbps/non-blocking
Switch Throughput@64Bytes 29.76Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at PoE/PSE
PoE Power Supply Type End-span
PoE Power Output Per Port 54V DC, 36 watts (max.)
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget
220 watts (max.) @ 25 degrees C
190 watts (max.) @ 50 degrees C
Number of 802.3af PDs 16 units
Number of 802.3at PDs 8 units
PoE Management
PD Alive Check
Scheduled Power Recycling
PoE Schedule
PoE Usage Monitoring
PoE Extension
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
Up to 4 sessions
VLAN
802.1Q tag-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP