(V2) Datasheet

3
GS-4210-16P4C
• IPSourceGuardpreventsIPspoongattacks
• DoS Attack Prevention
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Web switch management
– Console/Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and events)
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Congurationupload/downloadthroughWebinterface
– Dual Images
– Hardware reset button for system reboot or reset to factory
default
• SNTP Network Time Protocol
• Network Diagnostic
– ICMPv6/ICMPv4 Remote Ping
– Cable Diagnostics
– SFP-DDM (Digital Diagnostic Monitor)
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• Event message logging to remote Syslog server
• Smart fan with speed control
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system for deployment management
Scheduled Power Recycling
The GS-4210-16P4C allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specified time each week. Therefore, it will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
PoE Schedule for Energy Savings
Under the trend of energy savings worldwide and contributing to environmental
protection, the GS-4210-16P4C can effectively control the power supply besides
its capability of giving high watts power. The “PoE schedule” function helps you
to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs or enterprises save power and
money. It also increases security by powering off PDs that should not be in use
during non-business hours.
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-4210-
16P4C enables the administrator to monitor the status of the power usage of the
connected PDs in real time. Thus, it greatly enhances the management efficiency
of the facilities.
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the GS-4210-16P4C operates on a per-port basis
at 10Mbps duplex operation but can support 36-watt PoE power output over a
distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the GS-4210-16P4C provides an additional solution
for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable
installation.