(V2) Datasheet

2
GS-4210-16P4C
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (Static Trunk)
– Maximum 2 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Quality of Service
• Ingress/Egress Rate Limit per port bandwidth control
• Storm Control support
– Broadcast/Unknown-Unicast/Unknown-Multicast
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policie
Multicast
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
Security
• Authentication
– IEEE 802.1X Port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ login user access authentication
• Access Control List
– IPv4/IPv6 IP-based ACL
– MAC-based ACL
• MAC Security
– Static MAC
– MAC Filtering
• PortSecurityforSourceMACaddressentriesltering
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Redundant Ring, Fast Recovery for Critical Network Applications
The GS-4210-16P4C supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s
network to enhance system reliability and uptime in various environments.
Factory
Control Center
GS-4210-24PL4CGS-4210-24P4C
ERPS Ring
Control Center
Warehouse
GS-4210-16P4C
PoE
+
Wireless AP
IP Camera
PoE
+
Wireless AP
1000
1000
1000
PoE PoE
1000BASE-SX/LX Fiber Optic
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
1000
Built-in Unique PoE Functions for Powered Devices Management
As it is the managed PoE switch for surveillance, wireless and VoIP networks, the
GS-4210-16P4C features the following special PoE management functions:
■PDAliveCheck
■ScheduledPowerRecycling
■PoESchedule
■PoEUsageMonitoring
■PoEExtension
Intelligent Powered Device Alive-Check
TheGS-4210-16P4CcanbeconguredtomonitorconnectedPD(powereddevice)
status in real time via ping action. Once the PD stops working and responding, the
GS-4210-16P4C will resume the PoE port power and bring the PD back to work. It
will greatly enhance the network reliability through the PoE port resetting the PD’s
power source, thus reducing the administrator’s management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification