GS-4210-Series (V2) Quick Guide

5
3. Requirements
z Workstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
z WorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
z Serial Port Connection (Terminal)
 The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
 The above Workstations have been installed with terminal emulator, such as
TeraTerm,PuTTYorHyperTerminalincludedinWindowsXP/2003.
 Serial cable--Oneendisattachedto theRS-232serialport,whiletheother
end to the console port of the Managed Switch.
z Ethernet Port Connection
 Network cables--Usestandardnetwork(UTP)cableswithRJ45connectors.
 The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 8.0 or aboveto access
the Managed Switch. If the Web interface of the Managed Switch
is not accessible, please turn off the anti-virus software or firewall
and then try it again.