GS-4210-Series (V2) Quick Guide

12
5. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the GS-4210
Managed Switch Series through the new IP address.
Note
If you are not familiar with console command or the related param-
eter, enter “?” anytime in console to get the help description.
5.3 SavingtheCongurationviatheConsole
In the switch, the running conguration le is stored in the RAM. In the current
version, the running conguration sequence running-cong can be saved from the
RAMtoFLASH bywriting the command or copying the running-cong startup-
cong command, so that the running congurationsequence becomes the startup
congurationle,whichiscalledcongurationsave.
At the “GS-4210 Series#” prompt, enter “copy running-cong startup-
cong”asshowninFigure5-6.
Figure 5-6: The Conguration Screen