GS-4210-Series (V2) Quick Guide

11
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
 Show the current IP address
1.Atthe“GS-4210 Series#” prompt, enter “show ip”.
2. The screen displays the current IP address, subnet mask and gateway as shown
inFigure5-4.
Figure 5-4: IP Information Screen
 Conguring IP address
3.Atthe“GS-4210 Series#” prompt, enter “congure”.
4.At the “GS-4210 Series(cong)#” prompt, enter the following command and
press <Enter>asshowninFigure5-5.
GS-4210Series(cong)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210Series(cong)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-5: IP Address Screen