GS-4210 Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of GS-4210 Series
4.16.3 Backup Manager
This function allows backup of the current image or configuration of the Managed Switch to the local management station. The
Backup Manager screen in Figure 4-16-3 appears.
Figure 4-16-3 Backup Manager Screenshot
The page includes the following fields:
Object Description
Backup Method
Select backup method from this drop-down list.
Server IP
Fill in your TFTP server IP address.
Backup Type
Select backup type.
Image
Select active or backup image.
Buttons
: Click to back up image, configuration or log.
4.16.4 Upgrade Manager
This function allows reloading of the current image or configuration of the Managed Switch to the local management station. The
Upgrade Manager screen in Figure 4-16-4 appears.
349