(V2) Quick Guide

9
3.3 SavingtheCongurationviaConsole
In switch, the running conguration le stores in the RAM. In the current version,
the running conguration sequence running-cong can be saved from the RAM to
FLASH by save command or copy running-cong startup-cong command, so
that the running conguration sequence becomes the startup conguration le,
whichiscalledcongurationsave
1. On “GS-4210-24P2S #”prompt,enter “copy running-cong startup-cong”
asshowninFigure3-6.
Figure 3-6: Saving the Conguration Screen