(V2) Quick Guide

5
3. Terminal Setup
To congurethe system, connect a serialcable toa COM port on a PC or notebook
computerandtoRJ45typeofconsoleportofthePoEManagedSwitch.
PoE Managed Switch
PC / Workstation
with
Terminal emulation software
Serial Port
Serial Port
115200,8,n,1
RS232 to RJ45 Cable
Figure 3-1: PoE Managed Switch Console Connectivity
A terminal program is required to make the software connection to the PoE
ManagedSwitch.
1.RunterminalprogramontheOS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:115200
z Databits:8
z Parity:None
z Stopbits:1
z Flowcontrol:None
Figure 3-2: COM Port Conguration