(V2) Quick Guide

10
4. Starting Web Management
The following shows how to start up the Web Management of the PoE Managed
Switch. Note the PoE Managed Switch is congured through an Ethernet
connection.PleasemakesurethemanagerPCmustbesettothesameIP subnet
address.
Forexample,thedefaultIPaddressofthePoEManagedSwitchis192.168.0.100;
then the manager PC should be set to 192.168.0.x (where x is a number
between1and254,except100)andthedefaultsubnetmaskis255.255.255.0..
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address: 192.168.0.100
Figure 4-1: IP Management Diagram
4.1 Logging in to the PoE Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password“admin”.TheloginscreeninFigure4-2appears.
DefaultUsername:admin
DefaultPassword:admin
Figure 4-2: Web Login Screen