Quick Guide

7
3.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will run self testing procedures. Then, the following message asks
to log in user name and password. The factory default user name and password
areshownasfollowsandtheloginscreeninFigure3-3appears.
Username:admin
Password:admin
Note
The following console screen based on the GS-4210-24T4S will be
the same as those of GS-4210-8T2S, GS-4210-8P2S, GS-4210-
16T2S, GS-4210-16P2S, GS-4210-24T2S, GS-4210-24P2S, GS-4210-
24T4SRandGS-4210-48T4S.
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. Fora detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
3.2 ConguringIPAddressviatheConsole
TheManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0