GS-4210-Series (V2) User Manual

User’s Manual of GS-4210 Series
35
■ PoE-In-Use Interfaces (Port-1 to Port-8)
PoE-In-Use Amber
Lights: To indicate the port is providing DC in-line power.
Off: To indicate the port is not providing DC in-line power.
■ 100/1000BASE-X SFP Interfaces (Port-11 to Port-12)
LED Color Function
100/1000
LNK/ACT
Green
Lights: To indicate that the port is operating at 100Mbps or 1000Mbps.
Blinks:
Off:
To indicate that the switch is actively sending or receiving data over that port.
To indicate that the port is link down.
LED Indication
Figure 2-1-14: GS-4210-16T2S LED Panel
■ System
LED Color Function
PWR Green
Lights
to indicate that the Switch has power.
 10/100/1000BASE-T Interfaces
LED
Color Function
1000
LNK/ACT
Green
Lights:
To indicate the link through that port is successfully established at 1000Mbps.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
10/ 100
LNK/ACT
Orange
Lights:
Blinks:
To indicate the link through that port is successfully established at 10Mbps or
100Mbps.
To indicate that the switch is actively sending or receiving data over that port.
 100/1000BASE-X SFP Interfaces
LED
Color Function
1000
LNK/ACT
Green
Lights:
To indicate the link through that port is successfully established at 1000Mbps.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
100
LNK/ACT
Orange
Lights: To indicate the link through that port is successfully established at 100Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.