GS-4210-Series (V2) User Manual

User’s Manual of GS-4210 Series
34
 LED Definition
■ System
LED Color Function
PWR Green
Lights
to indicate that the Switch has power.
SYS Green
Off to indicate the system is booting.
Lights to indicate the system is working.
■ 10/100/1000BASE-T Interfaces (Port-1 to Port-8)
LED Color Function
LNK/ACT Green
Lights: To indicate the link through that port is successfully established.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
PoE-In-Use Orange
Lights: To indicate the port is providing DC in-line power.
Off: To indicate the port is not providing DC in-line power.
■ 100/1000BASE-X SFP Interfaces (Port-9 to Port-10)
LED Color Function
100/1000
LNK/ACT
Green
Lights: To indicate that the port is operating at 100Mbps or 1000Mbps.
Blinks:
Off:
To indicate that the switch is actively sending or receiving data over that port.
To indicate that the port is link down.
LED Indication
Figure 2-1-13: GS-4210-8P2C LED Panel

LED Definition
■ System
LED Color Function
PWR Green
Lights
to indicate that the Switch has power.
SYS Green
Off
to indicate the system is booting.
Lights
to indicate the system is working.
■ 10/100/1000BASE-T Interfaces (Port-1 to Port-10)
LED Color Function
LNK/ACT Green
Lights: To indicate the link through that port is successfully established.
Blinks: To indicate that the switch is actively sending or receiving data over that port.