GS-4210-Series (V2) User Manual

User’s Manual of GS-4210 Series
270
• Server Priority
Set the server priority
• Dead Time
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
• Usage Type
Set the usage type. The following modes are available:
 Login
 802.1X
 All
Buttons
: Click to add Radius server setting.
Figure 4-5-19: Login Authentication List Page Screenshot
The page includes the following fields:
Object Description
• IP Address
Display the current IP address.
• Auth Port
Display the current auth port.
• Acct Port
Display the current acct port.
• Key
Display the current key.
• Timeout
Display the current timeout.
• Retries
Displays the current retry times.
• Priority
Display the current priority.
• Dead Time
Display the current dead time.
• Usage Type
Display the current usage type.
• Modify
Click to edit login authentication list parameter.
Click to delete login authentication list entry.