GS-4210-Series (V2) User Manual

User’s Manual of GS-4210 Series
214
4.3.8.3 LLDP Port Setting
Use the LLDP Port Setting to specify the message attributes for individual interfaces, including whether messages are
transmitted, received, or both transmitted and received. The LLDP Port Configuration and Status screens in Figure 4-3-111 &
Figure 4-3-112 appear.
Figure 4-3-111: LLDP Port Configuration and Optional TLVs Selection Page Screenshot
The page includes the following fields:
Object Description
• Port Select
Select port for this drop down list
• State
Enables LLDP messages transmit and receive modes for LLDP Protocol Data
Units. Options:
 Tx only
 Rx only
 TxRx

Disabled
• Port Select
Select port for this drop down list
• Optional TLV Select
Configures the information included in the TLV field of advertised messages.
 System Name: When checked the "System Name" is included in LLDP
information transmitted.
 Port Description: When checked the "Port Description" is included in
LLDP information transmitted.
 System Description: When checked the "System Description" is
included in LLDP information transmitted.
 System Capability: When checked the "System Capability" is included
in LLDP information transmitted.
 802.3 MAC-PHY: When checked the "802.3 MAC-PHY" is included in