Quick Guide

9
To check the current IP address or modify a new IP address for the GPON OLT,
pleaseusetheproceduresasfollows:
 ShowingtheCurrentIPAddress
1. On “Switch#”prompt,enter“show ip interface brief”.
2.The screen displays the current IP address, subnet mask and gatewayas shown
inFigure4-6.
Figure 4-6 Showing IP Information Screen
If the IP is successfully congured, the GPON OLT will apply the new IP address
setting immediately. You can access the Web interface of GPON OLT through the
newIPaddress.
Note
If you are not familiar with console command or the related
parameter, enter “help” or “?” anytime in console to get the help
description.
4.3 Changing Password
The default password of the switch is “admin”. For security reason, it is
recommended to change password and the following command conguration is
required:
Switch #cong
Switch_cong#username admin password planet2020
Switch_cong#