Quick Guide

8
Thecongurationcommandsareasfollows:
Switch# cong
Switch_cong#interface gigaEthernet 0/0
Switch_cong_g0/0)#ip address 192.168.1.254 255.255.255.0
ThepreviouscommandwouldapplythefollowingsettingsfortheGPONOLT.
IPv4 Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Figure 4-4 Conguring IPv4 Address of Management port Screen
InterfaceVLAN1
Thecongurationcommandsareasfollows:
Switch# cong
Switch_cong#interface vlan 1
Switch_cong_g0/0)#ip address 192.168.0.100 255.255.255.0
ThepreviouscommandwouldapplythefollowingsettingsfortheGPONOLT.
IPv4 Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Figure 4-5 Conguring IPv4 Address of Interface VLAN 1 Screen