Quick Guide

6
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the GPON OLT. The console port
of the GPON OLT is DCE already, so that you can connect the console port directly
throughPCwithouttheneedofNullModem.
PC/Workstation with COM Port and
Terminal Emulation Software
RJ45 Console
DB9 to RJ45
Serial Cable
Console
9600,N,8,1
Figure 4-1 GPON OLT Console Connectivity
A terminal program is required to make the software connection to the GPON OLT.
Tera Term program may be a good choice. The Tera Term can be accessed from
the Start menu.
1. Click STARTmenu,thenPrograms,andthenTera Term.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:9600
 Parity: None
Databits:8
 Stop bits: 1
 Flow control: None
Figure 4-2 Tera Term COM Port Conguration
4.1 Logging on to the Console
Once the terminal is connected to the device, power on the GPON OLT, and the
terminalwilldisplay“running testing procedures”.