Datasheet

Data Sheet
1
FTP-802 / FTP-802S15
1
100Base-FX to 10/100Base-TX PoE Media Converter
More than a Fiber Media Converter - a Power over Ethernet Injector as well
The best data link and power sourcing solution for long reach network
equipment
PLANET FTP-80x series is ideal for remote network equipment deployments, using two
networking technologies
• MediaConversion : 100Base-FX to 10/100Base-TX
• PoweroverEthernet : Power Sourcing Equipment (PSE), PoE Injector
Providing both PoE and ber-optic interfaces, the FTP-80x is ideal for service providers,
campuses and public areas requiring to deploy the PoE for wireless access points,
IP-based surveillance cameras or IP phones in any places easily, efficiently and cost
effectively.
PoE Optimizes the Installation and Power Management of Network Devices
The IEEE 802.3af capabilities of the FTP-80x reduce installation costs for many new
network productivity devices. As an IEEE 802.3af Power over Ethernet Injector, the
FTP-80x provides DC 48V voltage over Ethernet cables. It allows the twisted pair cable
between the FTP-80x and IEEE 802.3af compliant PD (Powered Device) or PoE Splitter
(such as POE-151S-5V/12V) to transfer data and power simultaneously.
Fiber-optic Link Capability Extends the Range of Network Deployments
The maximum distance between the PoE PSE and PD is 100 meters. To extend the
network device deployment range, the FTP-80x is integrated with fiber interface. The
FTP-80x PoE Media Converter is used to convert optical Ethernet signal to electrical
Ethernet signal that allows two type of segments connect easily, efficiently and
inexpensively. It can convert 10/100Base-TX signal to 100Base-FX signal and provides
the diverse fiber connecting types of options to meet different network applications.
By selectable model, the maximum networking distance can extend to as long as 15
kilometers and still sustain the transmission performance as high as 100Mbps. It works
in high performance Store and Forward mechanism; it also can prevent packet loss with
IEEE 802.3x flow control (full-duplex). With the LFP (Link Fault Pass-through function)
(LLCF/LLR) and the DIP switch design, it can immediately alarm administrators the
problem of the link media and provide efficient solution to monitoring the net. The DIP
switch provides the disabling or enabling of the LFP function.
Features
• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-
TX, 100Base-FX, IEEE 802.3af Power Over Ethernet
standard
• Auto-negotiation for 10/100Base-TX half duplex mode
or full duplex mode, auto MDI/MDI-X function on copper
port
• IEEE 802.3x full duplex ow control, back-pressure in
half duplex eliminate packets loss
• Provides DC 48V power over RJ-45 Ethernet cable to
device with Ethernet port
• Auto-detects POE IEEE 802.3af equipment
;
protects
devices from being damaged by incorrect installation
• 100Base-FX interface for up to 2km (multi-mode ber
50
μ
m/125
μ
m, 62.5
μ
m/125
μ
m) on FTP-802
• 100Base-FX interface for up to 15km (single-mode ber
9
μ
m/125
μ
m) on FTP-802S15
• DIP-switch: LFP (Link Fault Pass-through) mode
selection
• Compact in size, easy installation
• LED indicators for easy network diagnostics