User Manual

1.4 Product Features
 Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3u 100Base-FX standard
 One-channel media conversion between 10/100Base-TX and 100Base-FX
 TP port supports 10/100Base-TX auto-negotiation and auto-MDI/MDI-X
 100Base-FX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km on FT-902
 100Base-FX: 9/125μm single-mode cable provides long distance for 15km on FT-902S15
 100Base-FX: 9/125μm single-mode cable provides long distance for 35km on FT-902S35
 100Base-FX: 9/125μm single-mode cable provides long distance for 50km on FT-902S50
 100Base-FX WDM interface for up to 20km (single-mode fiber 9μm/125μm) on FT-906A20/FT-906B20
 10/100Base-TX: 2-pair Cat. 3/4/5 UTP cable, up to 100 meters
 Compacts size for working with PLANET MC family Media Chassis ( MC-700/MC-1500/MC-1500R)
 Wall-mountable hardware designed
 Built-in IP-Base Web interface for remote management
 Layer 2 Management Feature
; Store-and-Forward mechanism
; Built-in Web operation interface for remote management and setup
; Manual IP address setting / DHCP client for IP address assignment
; SNMP v1 / v2c monitor / private Enterprise MIB
; Event trap and SNMP trap support
; Speed duplex mode configuration / Flow Control setting / bandwidth Control on TP / Fiber port
; Supports Port Status / Ethernet Statistics on both TP and Fiber interface
; Supports Maximum frame size to 16K bytes
; Loop detection / Broadcast / Multicast / Unicast storm control
; Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
; 802.1p Tag Priority / IP address priority / IP DSCP option in Quality of Service Mode and Strict Priority /
Weighted Round Robin (WRR) QoS policies
; TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
; 16 TCP / UDP Filter groups
; Password setting, IP setting and devices description setting through Planet Smart discovery utility
; Firmware upgrade via remote Web interface
 External DC5V 2A power supply
 Compact in size, easy installation
 LED indicators for easy network diagnosing
 Reset Button at the front panel for resetting the factory default
 Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /100Base-FX SFP module
-1-