User Manual

The 802.3ah Setup Web page includes the following configurable data:
802.3ah OAM State
Provide disable or enable the 802.3ah OAM State function. Default mode is Enable.
802.3ah OAM Mode
Allow to choose “Active” or “Passive” for 802.3ah OAM Mode. Default mode is
Passive.
Loopback Reply
Provide disable or enable the Loopback Reply function. Default mode is Enable.
Remote OAM Configure
Provide disable or enable the Remote OAM Configure function. Default mode is
Enable.
Remote OAM Configuration
Result
Display the Remote OAM Configuration Result.
Apply button
Press this button for save current configuration of Managed Media Converter.
Table 4-15 Descriptions of the 802.3ah Setup Web Page Screen Objects
#Notice:
1. The 802.3ah function must work with manageable device that supports 802.3ah function.
2. Please use the PLANET FT-90Xv2 and GT-90X as the Remote device.
4.7.5 802.3ah Loop Back Test
The 802.3ah Loop Back Test allows manual run this loop back test to check the interconnection between two Media
Converter devices. To assure the Remote 802.3ah function can work correctly.
This function provides 802.3ah Loop Back Test of Managed Media Converter. Press the “Apply” button to run 802.3ah
Loop Back Test and see the 802.3ah Loop Back Test Result of Managed Media Converter, also press the “Refresh”
button to renew the Web screen. The screen in Figure 4-40 appears and Table 4-16 describes the 802.3ah Loop Back Test
object of Managed Media Converter.
-46-